Kamfanoni Masu Masana'antu ga Kasar Sin Ingancin Ingancin Horar da Wuta ta Tsinkaya

Short Short:

Zamu yi kusan kowanne irin qoqari na kasancewa mai kyau da kamala, da kuma hanzarta ayyukanmu don tsayawa kan matsayin manyan kamfanoni da manyan masana'antu na duniya na Kamfanoni Masana'antu na Kasar Sin, Ba za ku yarda ba. da duk wata matsalar sadarwa tare damu. Muna matukar maraba da kwastomomi a duk faɗin duniya don su riƙe mu don haɗin gwiwar ƙungiyar. Zamu yi kusan kowane irin aiki don kasancewarsa kyakkyawa kuma cikakke, da ƙw ...


  • Samfurin Origin: China
  • Item Babu .: DX-SC-01
  • Tashar jirgin ruwa: China
  • Gubar Lokaci: A 35-50 kwanaki
  • Biya: T / T, L / C
  • samfurin Detail

    Za mu yi kawai game da kowane aikinsa na kasancewa kyau kwarai da kuma m, da kuma bugun up mu ayyuka ga tsaye a lokacin da daraja na duniya top-sa da kuma high-tech Enterprises for Manufacturing Kamfanoni ga kasar Sin High Quality wuta retardant tiyo wuta Resistance tiyo , da za ka ba da duk wata matsalar sadarwa tare damu. Muna matukar maraba da kwastomomi a duk faɗin duniya don su riƙe mu don haɗin gwiwar ƙungiyar.
    Za mu yi kawai game da kowane aikinsa na kasancewa kyau kwarai da kuma m, da kuma bugun up mu ayyuka ga tsaye a lokacin da daraja na duniya top-sa da kuma high-tech Enterprises ga kasar Sin wuta retardant tiyo ,wuta Resistance tiyo , Hard aiki don ci gaba da yin ci gaba, } ir} iro a masana'antar, yi duk ƙoƙarin shiga kamfani na farko. Muna ƙoƙarin ƙoƙarinmu don gina ƙirar sarrafa kimiyya, don koyon ƙwararrun masaniya, don haɓaka kayan haɓaka kayan aiki da tsarin samarwa, ƙirƙirar samfuran ingancin farko, farashi mai ma'ana, ingancin sabis, isar da sauri, don gabatar da ƙirƙira. sabon darajar.
    1) Machine jiki da aka yi da bakin 

    2) A amfani da sabon pneumatic canji don sarrafa aikawa famfo da kuma matsa iska, sauki, mai lafiya ne kuma abin dogara 

    3) Sand famfo zane ne m, sauki aiki, tsawon rai sabis 

    4) New zane, dace da kananan da kuma matsakaici-sized workpiece surface jiyya

    5) Bayar da shawarar yin amfani da karami gilashin beads da kuma duk wani nau'i na finer zinariya grit 

    Low amo & kudin, high dace, babu ƙura yayyo, sauki tabbatarwa, grit sake yin fa'ida.

    Aikace-aikace:

    1) ayukan iska mai ƙarfi kayan aiki domin tsabtace na workpiece surface  

    2) ayukan iska mai ƙarfi kayan aiki ga pre-jiyya na workpiece surface shafi

    3) Sandblasting kayan aiki iya canza jiki da kuma inji Properties na workpiece

    4) Light aiki na workpiece

     

    Bayani dalla-dalla:

    model 1212 w 9080 w 5858 w
    aiki Area 1200 * 1200 * 800  900 * 800 * 580 580 * 580 * 580
    Load-hali 60 kilogiram 60 kilogiram 40 kg

    Tushen wutan lantarki

     220v, 50Hz  220v, 50Hz  220v, 50Hz
    Girma 20 Kg ruwa, 5Kg abrasives  20 Kg ruwa, 5Kg abrasives  20 Kg ruwa, 5Kg abrasives 
    matsa iska wadata Matsa lamba 4-8kg / cm2, Flow: ≥0.7m3 / min

     

    Bayanan fasaha da softaware: 
    1 Girman fasali (mm) 1700 * 1300 * 2000
    2 Girma na aiki (mm) 1000 * 1000 * 750
    3 Girman Window (mm)  670 * 790
    4 Tushen wutan lantarki 220V 50Hz
    5 Tushen Sama 0.8Mpa

    ayukan iska mai ƙarfi kafin & bayan na sandblast hukuma

    Wannan yashi ayukan iska mai ƙarfi inji iya zama atomatik ko Semi-atomatik dangane abokin ciniki ta bukatun.

     

    Ayukan iska mai ƙarfi sassa:

    The mota, da hannun riga safar hannu, da shigar da yashi tube, da seep yashi net, yashi, da tebur, da kwandon, ka kuma iya saya duk da wannan sassa daga gare mu.

    ayukan iska mai ƙarfi sassa na sandblast hukuma

     

    Shiryawa & Bayarwa:
    1 Kunshin Ta akwatin katako
    (Injin ƙirar yashi yana da nauyi, fiye da 200kg, akwai yankuna da yawa, saboda haka muna ba da shawarar sakawa ta akwatin katako.)
    2 Lokacin isarwa Kwanaki 50 bayan karɓar biyan bashin
    4 Garantin inganci Shekara Daya
    5 Bayan-tallace-tallace da Aka Bayar  Injiniyoyin da suke da su zuwa kayan aikin sabis a ƙasashen waje

    kunshin na sandblast hukuma

    Siyan kaiwa:

    Idan kana sha'awar mu na'ura, don Allah mai kirki sanar da mu da wadannan abubuwa:

    1. Sunan ka workpiece? (Kamar: ƙarfe simintin sassa, Aluminum auto sassa da dai sauransu)

    2. Dalilin da ayukan iska mai ƙarfi? (Tsatsa kau ko sa surface zama m shirya domin zanen?)

    3. A size kewayon da workpiece? (Max size da kuma min size)

    4. The nauyi na workpiece? (Max nauyi da kuma min.weight)

    5. The tsaftacewa iya aiki da rana / wata?

    6. Duk wani sauran fasaha da ake bukata?


  • Previous:
  • Next:

  • Aika sakon ka:

    Rubuta saƙonka a nan kuma ka aika da shi a gare mu

    related Products

    Aika sakon ka:

    Rubuta saƙonka a nan kuma ka aika da shi a gare mu
    WhatsApp Online Chat!