Through the type shot blasting machine to clean the room structure and operation matters

1. The structure of the clean room through the type shot blasting machine:

1 )The cleaning chamber structure of the through-type shot blasting machine is a large-capacity plate-type box-shaped welded structure, and the inner wall of the chamber is lined with a wear-resistant protective plate, and the cleaning operation is carried out in a closed cavity.

(1) Wear-resistant protective plate protects the wall of the room from wear and prolongs the service life of the chamber.

(2) Make full use of the projectile rebound function to continue to effectively hit the surface of the workpiece, which is conducive to improving the cleaning quality and cleaning efficiency.

2). Adjustment and use of the shot blasting machine

(1) Shot blasting indoor guard and cast-in-nut are consumables. Check the wear and change in time before operation to prevent damage to the siding. When installing the slab, pay attention to the gap at the joint.

(2) The rubber protective plate used for cleaning the indoor seal is a wearing part. If it is damaged, it should be repaired in time to prevent the projectile and dust from overflowing.

2. Through the type of shot blasting machine operation notes:

(1). When using the through-type shot blasting machine, it should be operated by trained professionals. When working, the operator should bring protective equipment to prevent the projectile from injuring people.

(2). During the operation of the machine, it is strictly forbidden to stand on the running roller.

(3). Through the shot blasting machine, it is forbidden to open the sealed warehouse observation door of the inlet and outlet during the operation to check the operation of the workpiece.

(4). Clean the pellets around the machine in time to prevent slipping and hurting people.

(5). No smoking is allowed in the operation area. Open flames are forbidden. Because the high temperature is generated when the type of shot blasting machine is running, the inside of the equipment contains flammable materials. If it is exposed to an open flame, it may cause fire.